HOT SELLING DSD-102 High Pressure hose crimper

High Pressure hose crimper 1.Crimping Range:6-102mm 2.Swage force:914T 3.Motor model:Y132M-4 4.Power:7

DSD-102  High Pressure hose crimper  

1. DSG-102 High pressure pipe locking machine is an enhanced type of a high pressure hose crimping machine, which is the special equipment for pressing the tube end of a high pressure rubber tube with an outer cover and a core together for the production or repair a hydraulic support.

2. DSG-102 is an ideal hose crimping machine to process some of extra large diameter ( or king size) hose, high pressure hydraulic hose and the special syphon.

3. DSG-102 is one of the most popular hose crimping machines for 4''hose, at home and abroad.

4. The composition and the main technical characters

The machine is composed of a locking & pressing mechanism, a motor, a gear pump, a control valve and an oil tank. More importantly, there is a pressure cylinder which can reach the swage force to 914ton.

Brief introduction of  High Pressure hose crimper  

DSG-102/S Model hose crimping machine produced by our factory is applicable to the crimping processing for the burst resisting hose, fiber tube and plastic pipe assembly used in the industry and agriculture and hydraulic transmission of engineering machinery. This machine has the following characteristics: small volume, light weight, having multifunction, rapid opening of die, being easy in operation, and convenient in maintenance.

Parameters High Pressure hydraulic hose crimping machine :

Crimping Range (inside diameter of hose): 6-150mm

Maximum length of attaching bent: 320mm

The locking & pressing force: 914T

Motor model: Y132M-4

Power: 7.5KW

Voltage: 380V

The rotation speed: 1440r/min

Gear pump model: CBF-E540-ALPL

Relief valve model: YF-L20H3-S

Reversal valve model: 34SM-L20H-W

Oil tank capacity: 100kg

Dimension: (L*W*H): 1800*840*1400mm

The weight: 1200kg

I. Operating Principle

Driven by the electric motor, the oil pump sends out the hydraulic oil to push the piston in the crimping oil cylinder to move forward, making the piston and two internal taper sleeves on the front cover push the die holder with symmetrical conical surface to retract radially to realize the crimping of die to the rubber hose assembly. When the amount of retraction reaches the setting value of staff gauge, the crimping stops automatically; after the solenoid operated directional valve changes direction, the hydraulic oil enters into four die-opening oil cylinders to push the crimping piston to move in an opposite direction; under the acting force of spring, the die holder drives the die comes back, in order to be easy to take out the crimped rubber hose assembly.

 

 

High Pressure hydraulic hose crimping machine

HOT SELLING DSD-102 High Pressure hose crimper